Clamp-on Ultrasonic Flow Meter TDS 100
Features
- Non-invasive clamp-on Technology
- Easy to install
- No pressure drop, moving parts, leakage or corrosion
- No pipe cutting or process interruption
- Measurement independent of fluid properties
- Wide Bi-directional flow range
- The sensors being clamp-on type, there’s no pressure loss. The sensors are easily mounted on the surface of the pipe without interrupting the flow for installation or maintenance.
- Advanced intelligent display, computation, and printing(data logger) to suit user’s diversified requirements. The flow is displayed in all pertinent engineering units. It runs out of regular AC power (110V/220V), or DC power.
- Signal outputs including current signal, frequency signal, serial data, switch outputs(1 OCT and 1 relay output). All the outputs displayed on the unit can be transmitted to a PC via RS-232/485 for further processing or storage.
Specification
| Accuracy | ≤1% |
| Repeatability | 0.2% |
| Linearity | 0.5% |
| Velocity Range | 0~±10m/s, Bi-directional measurement |
| Pipe Size | DN32~DN6000mm |
| Temperature | -30°C~160°C |
| Type of Liquid | Single liquid than can transmit ultrasound, such as water, seawater, sewage, oil, alcohol, etc. |
| Pipe Material | Steel, stainless steel, cast iron, copper, PVC, Aluminum, glass steel, etc. Liner is allowed. |
| Signal Output |
|
| Signal Input | 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor |
| Interface | RS485, support MODBUS |
| Units (User Configured) | Rate: Meter, feet, cubic meter, cubic feet, USA gallon, oil barrel, USA liquid barrel, imperial liquid barrel, million USA gallons times: second, minute, hour, day |
| Data Storage | SD card Data Logger: Built-in, stores over 2000 lines of data |
| Power Supply | DC8~36V or AC85~264V |
