F016 Flow Rate / Totalizer with linearization and pulse output
The F016 is a local indicator / transmitter which displays the actual flow rate, total and accumulated total. In addition to the average K-Factor or Span, eight linearization points can be entered with their frequencies or values. The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications. This linearization affects all displayed information as well as the pulse output. On-screen engineering units are easily configured from a comprehensive selection.
Advantages
- Robust aluminum or stainless steel 316L field enclosure (IP66, IP67 / NEMA Type4X) .
It is so rugged, a truck can even stand on it! - Intrinsically Safe available – ATEX, IECEx, FM and CSA approval for gas and dust applications.
- Familiar easy operation with the Fluidwell “Know one, know them all” configuration structure, saving time, cost and aggravation.
- Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.
Features
- Eight point linearization of the flow curve – with interpolation.
- Displays total and flow rate simultaneously.
- LED backlight with adjustable intensity.
- Scaled pulse output reflecting the accumulated total.
- Easy configuration with clear alphanumerical display.
- Large digit selection for flow rate or total.
- Ambient temperature: -40°C to +80°C (-40°F to 176°F).
- Flow rate: seven 17mm (0.67″) or 8mm (0.31″) digits.
- Total – resettable: seven 17mm (0.67″) digits.
- Accumulated total – not resettable: eleven 8mm (0.31″) digits.
- Intrinsically safe according ATEX, IECEx, FM and CSA C-US.
- GRP, Aluminum or high grade stainless steel enclosure.
- Separate engineering units for flow rate and total.
- Auto backup of settings and running totals in EEPROM memory.
- Various accessories are available for this product.
Applications
- Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required.
- The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).
Another Article:
|
Specification
Signal Inputs
Flowmeter Inputs
- Pulse type inputs:
Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
- Pulse type inputs:
Signal Outputs
Pulse outputs
- Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).
Max. frequency: 500Hz.
Adjustable pulse length from 1 msec. to 10 seconds. - Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.
- Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).
Alarm outputs
- None
Analog outputs
- None.
Supply
Power Supply
- Long-life Lithium battery.
- 4 – 20mA, input Loop-powered.
- 8 – 24V AC/DC.
- 115 – 230V AC.
- Basic: 8 – 30V DC.
Sensor Supply
- 3.2, 8.2, 12, 24V DC.
Hazardous Area
Intrinsically Safe
- ATEX:
Gas: II 1 G Ex ia IIC T4 Ga
Dust: II 1 D Ex ia IIIC T100°C Da - IECEx:
Gas: Ex ia IIC T4 Ga
Dust: Ex ia IIIC T100°C Da - CSA:
I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4 - FM:
I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4
- ATEX:
Explosion Proof
- ATEX:
Gas: II 2 G / Ex d IIB T5 Gb
Dust: II 2 D / Ex t IIIB T100°C Db
- ATEX:
Communication
- Modbus communication is available on F1-Series products.
- HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.
Download Datasheet: Fluidwell F016 Flow Rate/Totalizer Indicator
For further
information please contact : marketing@wmablog.com