>

Cari

  • Insertion water Flow Meters

    Insertion Flow Sensor
    EX80-SeriesDownloads
    Magnetic MeterFixed Depth Insertion Magmeter
    • Low-flow performance and accuracy superior to any mechanical flow sensor
    • No moving parts to wear out
    • Dedicated fittings for simple installation
    • Retainer clip automatically sets correct depth
    • Meter extends only ~1/8 of pipe diameter, minimizing potential for clogging with debris
    • Simple pulse train output can be used with any SeaMetrics signal processing module, or sent directly to a PLC
    • Available for pipe sizes 1″ to 10″, in Brass, 316 Stainless, PVC, and CPVC
    EX100/200
    		Downloads
    		The complete lack of moving parts of the EX100/200-Series insertion flow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings to wear out.
    IP80
    		Downloads
    		The IP80-Series are impeller (or “paddlewheel”) insertion meters designed for use with a wide variety of liquids in pipe sizes 1/2″ to 8″. Sensors are available in brass, 316 stainless
    steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality jewel bearings and nickel-bound tungsten carbide shafts are used for extreme low friction and long life.
    IP100/200
    		Downloads
    		The IP100/200-Series are adjustable depth insertion paddlewheels that come in brass or 316 stainless models
    to fit 3” to 48” pipe. Installation fittings are standard 1-1/2″ (101/201) or 2” (115/215) NPT. Fittings such as saddles and weldolets may be purchased either locally or from SeaMetrics.
    TX80Downloads
    The TX80-Series are insertion turbine meters designed for use in 1-1/2″ to 8″ pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available
    in 316 stainless steel, brass, PVC and polyprolylene, sensor bodies are machined from solid rod for maximum low-flow performance. The TX80-Series use special fittings that ensure ease of installation and correct depth setting in the pipe.
    TX100/200Downloads
    The TX100/200-Series are adjustable depth insertion turbines
    that come in brass or 316 stainless models to fit 3” to 48” pipe. Installation fittings are standard 1-1/2″ (101/201) or 2” (115/215) FNPT. Fittings such as saddles and weldolets
    may be purchased either locally or from SeaMetrics.
    Fittings for 80 SeriesDownloads
    		SeaMetrics insertion meters must be seated in fittings that match
    the pipe size and material.
    For further information please contact : marketing@wmablog.com

    • Entri Populer

    Entri yang Diunggulkan

    JASON INDUSTRIAL

    Founded in 1958 in Fairfield, NJ, Jason Industrial quickly gained a solid reputation as a go to source for both industrial hose and power tr...