Kofloc Mass Flow Controller D8500 SERIES Mass Flow Meter With Indicator

Mass Flow Controller/Mass Flow Meter With Indicator

Kofloc MODEL D8500 SERIES

Features :

• The high-lift actuator allows this compact model to control a large flow rate.
• Equipped with a display and setting unit, this model can be operated by a 24 VDC power supply
• The RS232C/RS485 communication function and integration function are provided as standard equipment.
• The 14-bit  converter permits to display and operation in 4-1/2 digits.
• Control of the flow rate of inflammable gas is possible because the heat generating part of the sensor is not exposed to the gas.
• There are no limitations on the mounting position that may be employed
• In addition to the SV setting, five other patterns can be set.
• Auto zero and auto close functions are also standard.

Standard Specifications :

• Flow range (F.S.) (at N2 calibration conditions) : 50 SCCM-5 SLM
• Applicable gases (dry gas): N2, air, O2, CO2, Ar, H2, He, etc.
• Sensor: a Thermal mass flow sensor
• Valve actuator: Normally-closed solenoid valve actuator *7
• Valve type: Poppet valve *7
• Control System :
  • Control/measurement range  : 2-100% F.S.
  • Response: 0-100% F.S. or more within 2 sec. *1
  • bellow 10% F.S. within 4 sec. *
• Accuracy :
  • Flow accuracy: ±1.0%F.S. *2
  • Repeatability: ±0.75%F.S.
• Pressure :
  • Proof pressure: 1000 kPa (G)
  • Allowable operating pressure: 500 kPa (G) or less
  • Operating differential pressure *7 : 50–300 kPa (G) =>  100-300 kPa (G)
• Temperature :
  • Allowable operating temperature: 5–45℃
  • Temperature characteristics : 0.2% F.S./℃
• Humidity :
• a). Allowable operating humidity: 10–90% (No condensation allowed)
• Leak: He leak rate: 1 × 10-8 Pa•m3/sec. or less *3
• Flow setting method:
  • Digital :
    • Setting & display unit
    • Communications
    • Event input selection
  • Analog *7 : (1) 0–5 V (2) 4–20 mA (freely selectable)
  • Flow rate output:
    • Analog : (1) 0-5 V (2) 4-20 mA (interlocked with the above)
• Display :
  • Display format: 7-segment 4-digit LED
  • Total flow: 12 digits *4
  • Mounting direction: Changeable
  • Built-in/Separate :Built-in, separate 1 m, separate 3 m, separate 5 m
  • Status display LED : OK (within allowable range), ALM (alarm output interlock) OUT1 (event output 1 interlock), OUT2 (event output 2 interlock) SV (set flow), PV (instantaneous flow), TF (total flow) IF (mode setting)
• Other I/O functions :
  • Event input : 3 × contact input
  • Alarm output: 1 × open collector output, Max. 35 V, 50 mA
  • Event output: 2 × open collector output Max. 35 V, 50 mA
  • Communications: RS-485, half-duplex, 9600 bps
• Power supply :
  • Rating : 24 VDC, current consumption: 300 mA max.
  • Allowable supply voltage range: 21.6–26.4 VDC (Ripple: 5% or less)
• Mounting position: Not specified
• Applicable standards: RoHS and EN62326-1: 2006
• Materials of parts in contact with gases: SUS316, SUS316L, SUS430, FKM, PTFE, chloroprene rubber (option)
• Joint: 1/4 SWL, RC1/4, 1/4 VCR
• Weight :
• Built-in: Approx. 1000 g
• Separate (excluding the cable): Approx. 1200 g (*6)