EGE Elektronik Vortex Flow Meter
Ege water Flow Meter
The flow meter devices Series SDV 652 is based on the vortex principle. They are well suitable for applications, where a good linearity and larger measurement precision is necessary. They are insensitive to quick temperature changes and the reaction time of the device is below one second.
The vortex principle allows a flow measurement without moving parts: Behind a bluff body in the flow, vortexes are generated which are detected by the device and yield the flow velocity.
- Flow measuring of water
- Deviation 2% of terminal value
- Programmable
- Analog and PNP output
Spesification
| Dimensions |  |
| Working range | 2…20 l/min |
| Maximum flow | 25 l/min |
| Precision | 15…50 °C < 2%, 5…60 °C < 4% |
| Outer diameter pipe | 10 mm |
| Pipe connection | tube fittings for steel tubes accord. to DIN 2391 / ISO 3304 |
| Output |  |
| ID-No. | P11319 |
| Type | SDV 652/1 GAPP |
| Switching current | 200 mA |
| Load RL | 200…500 Ω |
| Supply voltage | 24 DC ±10% V |
| Current consumption | <100 mA |
| Ambient temperature | 0…+60 °C |
| Medium temperature | 5…+60 °C |
| Start-up time | 4.5…8 s |
| Reaction time | 0.5…4 s |
| Programmable functions | switching point, hysteresis, switching output, time on/off delay, averaging, acess code |
| Compressive strength | 10 bar |
| Material housing | PBT sensor: PVDF, connection AISI 316 Ti |
| Protection | IP 65 EN 60529 |
| Connection | M12 connector |
| Note:Process connection in PTFE available |  |
Please Visit Wiratama-ma for more information and Price
For further
information please contact : marketing@wmablog.com
